Product Description:

Conductive Adhesive for ESD Vinyl Floorings Antistatic PVC Tiles 
This conductive adhesive product is a kind of dispersion Monocomponent antistatic adhesive, which is widely used to paste many kinds of antistatic and static dissipative sheet PVC flooring.

Application Instruction:

1. Make sure the floor is clean, dry, smooth and without sand booming.

2. this product does not need to mix water. Stir thoroughly the product before use

3. Please use the B3 to spread glue uniformly on the substrate. According to the working temperature and humility, wait about 5-10min, then the substrate is ready to lay flooring and use the cork the press the flooring.

4. After the flooring material is applied on the substrate, press the surface by a 50kg pressure roller to achieve the uniform effect, the sheet flooring should be flat and avoid stretching.

Technical Specification of Conductive Adhesive for ESD Vinyl Floorings Antistatic PVC Tiles:

Item    Requirement    

Colour    grey    

PH    7-8    

spreading rate    120-180g/m*m    

Waiting time     (depending on humidity and temperature)    

construction time    Within 30-60 minutes after the completion of the waiting time    

Quality Guarantee Period    12months    

load time    ≥72h    

density    1.1kg/L     

bleeder resistor    lower than 1x10 6  Ohm    

Packaging Details:    20kg/bucket    

Installment for ESD FLOOR ROLL